FOURKAY 1x4 HDMI Splitter over CAT6 1080p 70m, Loop Out, Without IR

1×4 HDMI splitter extender over Cat6 — distribute one 1080p@60Hz source to four remote displays up to 70m/230ft, plus a fifth display via the HDMI loop output on the transmitter. All five outputs run simultaneously at full 1080p resolution. Mirror/duplicate only; independent content per screen is not supported.
One-way Power over Cat6 (PoC) — the single included 12V/1A supply powers the transmitter and all four receivers through their Cat6 runs. No mains outlet needed at any remote display location, making this ideal for CCTV monitor stations, ceiling-mounted screens, and digital signage where running power to each endpoint is impractical.
16-profile EDID DIP switch — covers 1080p, 1080i, 1080p HDR, 1080p 3D, and PC resolutions (1920×1200, 1280×800, 1024×768) with 2.0, 5.1 or 7.1ch audio, plus Copy mode (reads EDID from the loop output display). Set EDID before powering the source — incorrect EDID is the most common cause of blank screens and wrong resolution output.
Lossle