MAXXT 1700W Wall Chaser, 150mm Twin Discs, 50mm Depth, 220-240V

【For cable and pipe channels】Create channels for electrical wiring and pipework in hollow bricks and foam blocks. This corded wall chaser is not recommended for concrete or stone. Avoid prolonged cutting in red brick or cement board.
【Adjustable depth and width】Set the cutting depth from 10-50mm and select a groove width from 8-42mm using the supplied spacers. The twin 150mm cutting discs define the sides of the channel for your installation.
【1700W with soft start】Powered by a 1700W motor at 7,500 rpm on a 220-240V, 50Hz supply. Soft start, constant-speed control and a two-stage reduction gearbox support controlled cutting. Overload protection and an indicator help you monitor the load.
【Dust extraction connection】Connect a compatible dust extractor to help reduce dust at the cutting point. The extraction port measures 40mm externally and 35mm internally; check hose and adaptor fit before use. Dust extractor not included. Use suitable dust extraction and respiratory protec