Twist-it Tile Levelling System 3 mm Kit – 300 Screw Clips + 300 Twisters

👷 Professional tiling tools to eliminate tile lippage and achieve a smooth, even surface.
🧰 This starter kit contains 300 screw clips and 300 twister caps to cover a surface area of 33 m² in size 900x600. Consult the calculation table to calculate the area in any other size.
✔️ Suitable for tiles and paving slabs between 3 and 20 mm thickness, with a desired joint width of 3 mm.
🚫 Do not use on tiles or slabs with a polished surface as there is a real risk of scratching the surface when tightening the Twister. We also advise against using levelling systems on natural stone with hand-cut edges as you will need a minimum joint of 1cm in this case.
🏡 When installing 20mm slabs, make sure you use enough clips, especially in the corners. Otherwise you risk breaking the clip prematurely when tightening.
💚 You can reuse the twisters after removing them. You can reorder the clips here in bags of 250 pieces in various joint widths.